Quectel BG96 Series - Page 13

LTE Module Series
BG96 Hardware Design
BG96_Hardware_Design 12 / 78
Point to point MO and MT
SMS cell broadcast
SMS storage: ME by default
(U)SIM Interface
Support USIM/SIM card: 1.8V, 3.0V
Audio Feature*
Support one digital audio interface: PCM interface
USB Interface
Compliant with USB 2.0 specification (slave only) and the data transfer rate
can reach up to 480Mbps
Used for AT command communication, data transmission, GNSS NEMA
output, software debugging and firmware upgrade
Support USB drivers for Windows XP, Windows Vista, Windows 7,
Windows 8/8.1, Windows 10, Windows CE 5.0/6.0/7.0, Linux 2.6/3.x/4.1,
Android 4.x/5.x/6.x/7.x
UART Interfaces
UART1:
Used for data transmission and AT command communication
115200bps by default
The default frame format is 8N1 (8 data bits, no parity, 1 stop bit)
Support RTS and CTS hardware flow control
UART2:
Used for module debugging and log output
115200bps baud rate
UART3:
Used for outputting GNSS data or NEMA sentences
115200bps baud rate
AT Commands
3GPP TS 27.007 and 3GPP TS 27.005 AT commands, as well as
Quectel enhanced AT commands
Network Indication
One NETLIGHT pin for network connectivity status indication
Antenna Interfaces
Including main antenna (ANT_MAIN) and GNSS antenna (ANT_GNSS)
interfaces
Physical Characteristics
Size: (22.5±0.15)mm × (26.5±0.15)mm × (2.3±0.2)mm
Weight: approx. 3.1g
Temperature Range
Operation temperature range: -35°C ~ +75°C
1)
Extended temperature range: -40°C ~ +85°C
2)
Storage temperature range: -40°C ~ +90°C
Firmware Upgrade
USB interface, DFOTA
RoHS
All hardware components are fully compliant with EU RoHS directive
1. “*” means under development.
2.
1)
Within operation temperature range, the module is 3GPP compliant.
NOTES