Quectel BG96 Series - Electrostatic Discharge

LTE Module Series
BG96 Hardware Design
BG96_Hardware_Design 62 / 78
1)
LTE Cat NB1 receiving sensitivity without repetitions.
6.7. Electrostatic Discharge
The module is not protected against electrostatics discharge (ESD) in general. Consequently, it is subject
to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD handling and
packaging procedures must be applied throughout the processing, handling and operation of any
application that incorporates the module.
The following table shows the electrostatic discharge characteristics of BG96 module.
Table 36: Electrostatic Discharge Characteristics
Tested Points
Contact Discharge
Air Discharge
Unit
VBAT, GND
±10
±15
kV
Main/GNSS Antenna
Interfaces
±10
±15
kV
NOTE