Quectel EM05-G - Reliability, Radio and Electrical Characteristics; Power Supply Requirements

LTE Standard Module Series
EM05-G Hardware Design
EM05-G_Hardware_Design 60 / 69
6 Reliability, Radio and Electrical
Characteristics
6.1. Power Supply Requirements
The input voltage of EM05-G is 3.135–4.4 V, as specified by document [1]. The following table shows the
power supply requirements of EM05-G.
Table 31: Power Supply Requirements
6.2. Current Consumption
The values of current consumption are shown below.
Table 32: Current Consumption of EM05-G
Parameter
Description
Min.
Typ.
Max.
Unit
VCC
Power supply
3.135
3.3
4.4
V
Description
Conditions
Typ.
Unit
OFF State
Power down
TBD
uA
Sleep State
AT+CFUN=0 (USB disconnected)
TBD
mA
WCDMA @ PF = 64 (USB disconnected)
TBD
mA
WCDMA @ PF = 64 (USB suspended)
TBD
mA
WCDMA @ PF = 128 (USB disconnected)
TBD
mA
WCDMA @ PF = 256 (USB disconnected)
TBD
mA