Need help?Do you have a question about the Quectel FC80A and is the answer not in the manual?
General| Category | Control Unit |
|---|---|
| Form Factor | LGA |
| GSM Bands | 850/900/1800/1900 MHz |
| Data Rate (LTE) | 10 Mbps (DL), 5 Mbps (UL) |
| Operating Temperature | -40°C to +85°C |
| Interface | UART |
| GNSS | GPS, GLONASS, BeiDou |
| Power Supply | 3.4V to 4.2V |
| Storage Temperature | -40°C to +90°C |
| Certifications | CE, FCC, RoHS |
| Module Type | LTE Cat 1 Module |
Restrictions on the use and disclosure of provided documents and information.
Confidentiality requirements for documents and information provided by Quectel.
Rights and restrictions regarding copyrighted material owned by Quectel and third parties.
Obligations and restrictions governing the use of third-party materials.
Quectel's policy on data handling and third-party data security.
Statements on liability, accuracy, and completeness of information provided.
Chronological record of changes and updates made to the document.
Explanation of special marks used in the document for features or status.
Overview of the FC80A module, its capabilities, and technologies.
Summary of the main features and specifications of the FC80A module.
Block diagram illustrating the internal architecture and connections of the FC80A.
Information on the evaluation board and peripherals for application development.
Top view pinout diagram and pin assignment for the FC80A module.
Detailed description of each pin's function, I/O type, and comments.
Definition of power supply and ground pins with voltage requirements.
Details on WLAN interface connections, including WLAN_EN and WLAN_WAKE.
Pin definitions and connection diagram for the SDIO interface.
Details on Bluetooth interface connections, including UART, PCM, and wake-up signals.
Description of other interfaces like WLAN_SLP_CLK and SDIO_VSEL.
Definition of pins for RF antenna connections.
Absolute maximum ratings and recommended operating conditions for the module.
DC electrical characteristics for 1.8V and 3.3V domains.
Specified temperature ranges for module operation and storage.
Power consumption data for various operating modes and conditions.
Measured RF output power values for different Wi-Fi standards.
Measured RF receiving sensitivity for different Wi-Fi standards.
Transmitting and receiving performance characteristics for Bluetooth.
Electrostatic discharge characteristics and protection measures.
Physical dimensions and tolerances of the FC80A module.
Recommended PCB footprint layout for the module.
Illustrations showing the top and bottom views of the module.
Requirements for storing the module to maintain quality and shelf life.
Guidelines for soldering processes and thermal profiles.
Details on carrier tape, plastic reel, and packaging process.
List of other documents relevant to the FC80A module.
Definitions of terms and abbreviations used in the manual.
EU declaration of conformity for the radio equipment type Wi-Fi & BT Module.
Information on Maximum Permissible Exposure (MPE) levels and usage distance.
Important notices and requirements for OEM integrators installing the module.
Warning regarding unauthorized modifications and their impact on equipment operation.
Compliance with FCC radiation exposure limits and installation distance requirements.
Compliance statements for Industry Canada standards for radio devices.
Guidance on test modes and host product evaluation for modular transmitters.
Host product evaluation for Part 15B unintentional radiators is required.
List of antennas, types, and gain requirements for compliance.
To Next Page
