GNSS Module Series
L89_R2.0_EVB_User_Guide 17 / 25
5 Testing via QGNSS Tool
This chapter explains how to use the QGNSS tool for verifying the status of L89 R2.0 module. For more
information about QGNSS tool use, see document [2].
5.1. COM Port and Baud Rate Setting
Step 1: Assemble the EVB accessories.
Step 2: Flip the Power switch (S101) to ON position to power on the EVB.
Step 3: Start the QGNSS and click “Setting” and “Serial Port Configuration” (the L89 R2.0 module
supports 9600 bps by default).
Figure 7: QGNSS Setting
To Next Page
Loading...
