Quest Engineering Scuba Tector Pro

SCUBA TECTOR PRO
The Quest Scuba Tector Pro follows on the success of the Quest Scuba Tector. The Scuba Tector Pro features a foldable,
interchangeable search coil, unique dual-hinge joint, extendable handle, larger battery capacity and a powerful pulse
induction system. All these features make the Scuba Tector Pro the ultimate detector for beach or underwater use.
Interchangeable search coil and the extendable shaft need to be purchased seperately and are not included. How you can
change the coil is explained when buying the new coil.
PLEASE READ CAREFULLY BEFORE DETECTING
• This detector is waterproof up to 60M/200FT. It can withstand immersion in 60M/200FT of water for 30 minutes.
• Please do not pull the coil cable.
• Install the anchor ring and attach the lanyard to not lose the detector, especially while detecting under water.
• Make sure the battery cap thread and O rings are free of dust, mud, sediment, etc. Always remember to keep
the end cap thread and O-rings lubrcited with silicone grease to maintain a tight seal.
• Before searching under water or cleaning the detector, make sure that the battery cap is secured tightly , so that
no water can get in.
• Always wash your detector in fresh water after each dive. Do not use any chemical cleaners and solvents for
cleaning and/or for any other purpose. Wipe or air the detector dry thoroughly before storing or charging.
• Always Store your detector fully charged.
• Do not store the detector under extremely low or high tempertures for extended periods. (Storage Temperature:
-20 to 60 °C)
1

Quest Engineering Scuba Tector Pro Specifications

General

Brand	Quest Engineering
Model	Scuba Tector Pro
Category	Metal Detector
Language	English

Summary

Important Safety Information

Waterproof Capabilities and Precautions

Details the detector's waterproof rating up to 60M/200FT and crucial pre-detection checks for secure seals.

General Operational Safety Guidelines

Covers essential safety steps for using the detector, including lanyard use, maintenance, and storage.

Package Contents and Usage Guides

Beach Detecting Procedure

Instructions on extending the detector's length with a rod adaptor for effective ground and beach detection.

Scuba Detecting Procedure

Guidance on installing the anchor ring and lanyard to secure the detector during underwater searches.

Detector Operation

Power OnOff and Auto-Retune

Details the process for turning the detector on and off, including its automatic retuning feature.

Selecting Detecting Modes

Explains how to switch between Audio, Vibration, and Audio/Vibration detecting modes.

Adjusting Sensitivity Settings

Guides users on setting sensitivity levels from Low to Boost using button combinations.

Controlling the Search Light

Describes the procedure to activate or deactivate the detector's search light.

Advanced Functions and Battery Management

Lost Alarm Functionality

Describes the alarm that activates if the detector is not used, aiding in recovery and preventing power loss.

Resetting the Detector

Explains how to retune the coil to current ground conditions to minimize interference and false signals.

Low Battery and Recharging

Covers battery life, indicators, and recommended procedures for recharging the detector.

Retune Function Explained

Details the retune function for ground balance and narrowing the detection field.

Dive Mode Operation

Instructions for entering and operating the detector in Dive Mode for underwater use.