Need help?Do you have a question about the Quest Engineering V60 and is the answer not in the manual?
General| Pinpoint Mode | Yes |
|---|---|
| Waterproof | Yes |
| Display | LCD |
| Target ID | Yes |
| Ground Balance | Manual |
| Weight | 2.5 lbs |
Steps to power on the metal detector for the first time.
How to change detection modes based on your location.
Process for noise canceling to improve signal clarity.
Correct coil sweep method for best detection results.
Step-by-step instructions for assembling the metal detector.
How to fold the detector for compact storage.
Instructions for fully charging the detector's battery before first use.
Applying a protective film to the detector's screen.
Explanation of detector buttons and their associated functions.
Instructions for pairing, adjusting volume, and general use of wireless headphones.
Key information displayed on the screen, like target ID and signal strength.
Understanding settings like frequency, volume, and clock display.
How the detector identifies targets numerically from 0 to 99.
How saltwater and mineralization affect detection accuracy.
Visualizing signal strength over time for target analysis.
Adjusting sensitivity and differentiating target types.
Choosing optimal frequencies for various detection scenarios.
Details on Park, Field, Beach, Gold, and Cache modes.
Customizing audio tones and understanding TID display.
Adjusting TX Power, Recovery Speed, and other functions.
Benefits of using multi-frequency detection for enhanced performance.
When and why to use single frequencies for specific conditions.
Step-by-step guide to selecting different detection frequencies.
Sources of electromagnetic interference and its effects on detection.
How the detector automatically filters unwanted signals.
How to accurately locate targets before digging.
Interpreting the on-screen display for pinpointing.
Calibrating the detector to local soil conditions.
Performing automatic ground balance for optimal performance.
Ideal settings and uses for detecting in parks and trashy areas.
Best uses for detecting in fields and historical sites.
Detecting in beach environments and wet sand.
Settings for goldfields and deep target detection.
How to navigate through the detector's menus.
Setting target ID acceptance/rejection ranges for better filtering.
Adjusting transmitter power and target recovery speed.
How to save, edit, and apply custom settings.
Customizing the number of audio tones for target identification.
Fine-tuning audio tone ranges for better discrimination.
Adjusting audio frequencies for specific target sounds.
Customizing the volume of individual tone spaces.
Sorting ferrous from non-ferrous targets accurately.
Setting the amplitude of background noise.
How the gyro sensor enhances detection and efficiency.
Extending battery life by automatically switching to low-power.
Adjusting LCD brightness and refresh rate.
How to set and adjust the detector's clock.
Connecting new wireless headphones or audio gear.
Connecting or disconnecting previously paired devices.
Restoring the detector to its default configuration.
Viewing the current firmware installed on the detector.
Steps to get the updater software and prepare devices.
Step-by-step guide to upgrading the detector's firmware.
Ensuring proper setup and clean hands before detecting.
Protecting components and cleaning after detecting.
Battery, coil, headphone care and vital safety rules.
Labeled diagram of the main detector parts.
Identification of supplied accessories like headphones and cables.
Detailed technical specifications for the V80 detector.
Detailed technical specifications for the V60 detector.
Solutions for detector not turning on or excessive noise.
Troubleshooting sound, pairing, and charging issues.
Resolving charging indicator and speaker problems.
Information on waterproof capability and warranty periods.
Conditions not covered by warranty and user obligations.
Procedures for service and limitations of liability.
To Next Page
