Quest Engineering V60 User Manual

GROUND BALANCE
Ground balance. Ground balance.
Ground balancing helps calibrate the
detector to the local ground, eliminating
false signals caused by mineralization or
saltwater effect. The Ground Balance
feature adjusts the detector to match the
specific conditions of the local soil, thereby
reducing false signals that can arise from
mineralization or saltwater effect.
There are two ways to balance the ground:
1 Auto Tracking.The V Series metal
detectors are equipped with intelligent
automatic ground tracking, allowing them
to operate without ground balancing on
most minor mineralized terrains. This
design offers flexibility and ease of use,
especially for beginners or in areas with
minimal ground mineralization.
2 Auto G.B. In highly mineralized or salty
grounds, or for more experienced users
seeking extra depth and stability, Auto
Ground Balance (Auto G.B.) becomes
essential.
With the V Series, Auto G.B. can be
performed in two ways:
1 Hold pinpoint button and pump coil on
ground. The device automatically adjusts to
the ground conditions. During the operation,
the LCD will display the Dynamic Ground
Effect Ball with a 2-digit real-time ground
balance value. When the number stops
changing dramatically and you don't hear
much noise from the detector, that means it's
ready. Then, let go of the Accept/Reject button
2 Just pump above ground when Gyro sensor
feature "pump to GB" is on.
21
2
It's important to note that Ground Balance
adjustment is local, meaning that only the
current Search Mode Search Profile is
affected by changes to this setting.
VISUALIZATION OF AUTO G.B.
Hold to AUTO G.B.
Release to cancel
13

Quest Engineering V60 Specifications

General

Brand	Quest Engineering
Model	V60
Category	Metal Detector
Language	English