Instructions
Turn On/Off: Press and hold the "O" / ⏻ button to
power the headphones on or off."
Adjust Volume: Press the upward arrow(+) to
increase the volume. Press the downward arrow(-)
to decrease the volume.)"
Pairing New Devices: Make sure the detector or
smartphone is under paring mode. When the
headphones are off, hold the power button for 5
seconds to enter pairing mode for connecting with
a new detector or smartphone."
Erase All Pairings(reset): To remove all previously
paired devices, turn off the headphones and then
hold the power button for 10 seconds."
Fit Adjustment: If the headphones feel too tight on
your head, extend the arms to ensure your whole
ears fit comfortably inside the ear cups."
Volume Safety: For the safety of your hearing,
avoid setting the volume too high."
Wired Connection: If the battery is drained, use a
3.5mm to 3.5mm audio cable to connect the
headphones to the detector."
Initial Charge: Before using the headphones for
the first time, make sure to fully charge them.
To Next Page
Loading...
