CAUTION
During the installation and use of this product, all electrical safety
regulations of the country and regions must be strictly observed.
The power supply must be disconnected when disassembling the
product. Do not operate with power on.
If the product does not work properly, please contact the supplier or
our company, and do not disassemble or change the product in any
way. We are not responsible for any problems caused by unauthorized
maintenance or modification.
WARNING
Don't install the product in a place where the surface is easy to shake
or be impacted, as it may damage the product.
Don't place the product in places where it may be exposed to rain or
moisture.
The product should be used away from places where there is
magnetic interference.
Don't use in flammable and explosive environments.
Pay attention to the air outlet and its surroundings. High temperature
operation, be careful of burns.
Power supply should be turned off during breaks or when finished to
avoid safety accidents.
Please keep the air outlet unblocked and ensure there is no
obstruction.
Check and maintain the product regularly. Do not use the product
when it is damaged, especially when the power cord is damaged.
The handle must be correctly placed on the holder when not
working, and do not replace it on the workbench.
After operation, the unit can be turned off only when it is cooled
below 100 ℃ (in the sleep state).
Please unplug the power cord when the product is not used for a long
time.
To Next Page
Loading...