Quick 969D+ - Display and Function Descriptions; Part descriptions; Button function descriptions

3
5. Display and Function Descriptions
5.1 Part descriptions
5.2 Button function descriptions
No.
Part Name
1
Soldering station
2
Iron stand
3
Handle holder
4
power switch
No.
Button
Descriptions
1
▲
In the Main menu，Press button once to increase 1℃，press and
hold it to continuously increase.
2
*
In the Main menu,Press▲or▼button to Change the
temperature,and then,Long press the * key to save
3
▼
In the Main menu,Press button once to decrease 1
℃，
press and hold
it to continuously decrease.
4
▲
and
▼
Turn off the power switch. Hold down the "▲" and "▼" buttons
At the same time, turn on the power switch to enter the password
setting interface.
5
*and▲and▼
In the Main menu，Press and hold it at the same time to temperature
calibration mode.