BTR Series
EN
INDEX
QUICK BTR SERIES INSTALLATION AND USER’S MANUAL - REV 001C
1 - Information about the product 5
1.0 - Technical Data 5
2 - Supply and equipment 6
2.0 - Standard supply and material included in the package 6
2.1 - Tools required for installation 6
2.2 - Recommended Quick
®
accessories not included 6
3 - Introduction 6
3.0 - Important notes 6
3.1 - Precautions 7
3.2 - Precautions for the installer 7
3.3 - Installation requirements 7
4 - Installation 8
4.0 - Thrusters position 8
4.1 - Counter flange installation 9
4.2 - Construction and installation of the closing hatch 11
4.3 - Retractable thruster installation 13
4.4 - Motor installation 14
4.5 - Check and mechanical adjustment of the system 14
4.6 - Installing the cable in the hatch 14
4.7 - Adjustment procedure 15
4.8 - Actuator adjustment 16
4.9 - Installing spring end-of-stroke cables 16
5 - Wiring diagram 17
5.0 - BTR basic system 17
5.1 - RTC R1 board 18
6 - Operation 19
6.0 - Dip-Switch for option selection 19
6.1 - Actuator current rotary selector 19
7 - Signalling 20
7.0 - Light signals 20
8 - Important warnings 21
8.0 - Important cautions 21
9 - Use 21
9.0 - Retractable thruster use 21
9.1 - Manual closing of the thruster in case of emergency 22
10 - Maintenance 22
11 - Product disposal 22
12 - List of components 23
12.0 - BTR 140 24
12.1 - BTR 185 25
12.2 - BTR 250 26
12.3 - BTR 300 27
13 - Spare parts 28
14 - Dimensions 29
To Next Page
Loading...
