Quick MC2 Series - Standard Equipment and Accessories; Standard Equipment Kit; RC Remote Control MC²

10
EN
INSTALLATION AND USE MANUAL QUICK MC² X3_DC REV001A
DC
Standard Equipment Kit
RC Remote Control MC
2
Screw
J3 RC Extension cable
CAN BUS 12 m
Connector cable
CAN T 5P F/F/F
CAN
Terminator
RC REMOTE CONTROL MC
2
touch - 5" - IP66
CAN BUS adapter cable (1 m / 3,28 ft)
Material included in the stabilizer’s packaging
Needed accessory and material included in its packaging
Not supplied with the stabilizer
Prewired
MC
²
X3 stabilizer
Base plate (OSP)