30
EN
RG5 1700/2000/2300/3000W IT EN - REV006A
Models’ dimensions on page 32
FITTING PROCEDURE
Position the upper section and connect the lower section to the assembly, inserting the shaft into the reduction unit.
Fix the windlass by screwing the nuts onto the fixing studs.
Connect the hoses deriving from the selector valve to the flanges of the hydraulic motor (see connection diagram on page 31).
F
THE PACKAGE CONTAINS:
hydraulic windlass (on deck unit + motorgearbox) - drill template - handle - bolts and screws (for
assembly) - user’s manual - conditions of warranty.
TOOLS REQUIRED FOR INSTALLATION:
drill and drill bits: Ø 15 mm (19/32"); Ø 150 mm (5"29/32 hollow mill);
hexagonal wrenche: 17 e 19 mm.
“QUICK
®
”ACCESSORIES RECOMMENDED:
anchoring RL control board (mod. 800) - Waterproof hand helds R/C (mod. HRC1002)
- Foot switch (mod. 900) - Hydraulic-magnetic circuit breaker - Anchor chain counter (mod. CHC1102M and CHC1202M) - Radio control
RRC (mod. R02, P02, H02).
(1) Measurements taken with a gypsy for a 12/13 mm chain.
(2) On request, shafts and studs can be supplied for greater deck thicknesses.
HYDRAULIC WINDLASS
90°
90°
90°
Quick
®
reserves the right to introduce changes to the equipment and the contents of this manual without prior notice.
In case of discordance or errors in translation between the translated version and the original text in the Italian language, reference will be made to the Italian or English text.
HYDRAULIC MODEL RG5 - / D
Motor type
Reversible gear-type
Motor power
9,6 cc 0,59 in
3
Lifting capacity
• 100 bar = 600 kg • 200 bar = 1700 kg • 1450.4 psi = 1433 lb • 2900 psi = 3748 lb
Max. chain speed @ working load (1)
40 lt /min = 23 mt/min 9,1 USG/min = 76 ft/min
Deck thickness (2)
40 ÷ 80 mm 1” 9/16 ÷ 3” 5/32 inch
Weight without drum 29,0 kg 63,9 lb
Weight with drum 34,4 kg 75,8 lb
SETTING VALUES (Suggested by Quick)
Flow rate
40 lt/min 9,1 USG/min
Maximum pression
200 bar 2900 psi
EXAMPLE INSTALLATION
TOP WITHOUT DRUM
To Next Page
Loading...
Need help?
General
