Quickie Salsa M User Manual

Instructions for Use
Salsa & Salsa M
Powered Wheelchair

Quickie Salsa M Specifications

General

Brand	Quickie
Model	Salsa M
Category	Wheelchair
Language	English

Summary

User Information

Intended use power wheel chairs

Defines the intended users and environments for power wheelchairs.

Area of application

Outlines the conditions and user types for which the wheelchair is suitable.

1.0 Your Wheelchair

2.0 How to use this manual

Guidance on navigating and understanding the owner's manual.

3.0 Label Explantation / Word definitions

3.1 Definitions of words used in this manual

Provides definitions for terms and symbols used throughout the manual.

3.2 Label explanations

Explains the meaning and purpose of various labels found on the wheelchair.

4.0 General safety warning and user tips

4.1 General warnings

Lists essential safety precautions and general advice for operating the wheelchair.

4.2 Features and options

Describes available features and options, noting potential country-specific variations.

4.3 Kerbs

Provides safety instructions regarding climbing or descending kerbs.

4.5 Brake release

Explains the procedure and conditions for using the brake release (freewheel) function.

4.6 EMC - Radio transmitting devices.

4.7 Emergency braking

Details the methods for stopping the wheelchair in emergency situations.

4.8 Sharp turns

Warns against high-speed turns and emphasizes speed reduction.

4.9 Batteries

Provides information on standard maintenance-free batteries and charging.

4.10 Tyres

Advises on regular tyre checks for pressure and signs of wear.

4.11 Weight limit

4.12 Wheelchair motors

Advises caution regarding hot motor casings after use.

4.13 Hot surfaces

Warns that upholstery and armrests can also become hot in direct sunlight.

4.14 Wheelchair range

Explains factors affecting wheelchair range and provides usage recommendations.

4.15 Road use

Provides guidance on safe and considerate road usage.

4.16 Adverse conditions

4.17 Ramps

Provides safety guidelines for using ramps with the wheelchair.

4.18 Transfer to and from the chair

Offers advice and safety measures for transferring users to and from the chair.

4.19 Lift and tilt modules

Warns about pinch hazards associated with lift and tilt modules.

4.20 Anti-tips

4.21 Use on a slope

Details how to safely operate the wheelchair on slopes and inclines.

4.22 Using a vehicle mounted passenger lift

Provides instructions and warnings for using wheelchair lifts with vehicles.

4.23 Creep mode

4.24 Stability of your wheelchair

Highlights factors that can affect wheelchair stability.

4.25 Wheels

Offers advice on tyre maintenance, pressure, and avoiding punctures.

4.26 Rear view mirror

4.27 Crutch holder

Details the correct and safe usage of the crutch holder accessory.

4.28 Lights and indicators

Advises on checking lights and indicators for night operation.

4.29 Swing away tray

Provides warnings regarding the weight limit and safe use of the swing away tray.

4.30 Using a kerb climber

Explains the procedure and safety precautions for using the kerb climber.

4.31 Lap belt (Standard Seat)

4.32 VR2 Controller (Fig. 4.21)

5.0 Preparing your wheelchair for use

5.1 Handling the wheelchair

Explains how to handle the wheelchair, including dismantling for transport.

5.2 Preparation for transportation or storage

Guides on preparing the wheelchair for transport or storage by removing parts.

5.8 Standard Armrests

5.8.1 Armrests-removing and replacing (Standard Seat).

Instructions for removing and reattaching standard armrests for side transfer.

5.8.2 Standard Seat Armrest Height Adjustment

Details the process for adjusting the height and angle of standard armrests.

5.9 Leg Rests

6.0 Seating

6.1 Firm seat board

Describes the firm seat board and its suitability for pressure relief cushions.

6.2 Seat cushions

Explains how to align and use seat cushions with Velcro strips.

6.3 Removable seat covers

Details how to remove and wash seat covers for hygiene.

6.4 Backrest upholstery

Explains how to adjust the tension of the optima backrest upholstery.

6.5 JAY backrests

6.6 Manual angle adjustment of the Rehab fixed back

Guides on how to adjust the backrest angle manually.

6.7 Standard Seat width adjustment

Details how to adjust the seat width for optimal positioning.

6.8 Rehab seat depth

Explains the procedure for adjusting the rehab seat depth.

6.9 Standard Seat height adjustment

6.10 Standard Seat Depth Adjustment

Details how to adjust the standard seat depth.

6.11 Backrest Angle Adjustment

Explains how to adjust the backrest angle for desired positioning.

6.12 Back Height Adjustment

6.13 Manual adjustable backrest (Standard seat)

6.14 Manual setting of the seat angle on the SALSA

Explains how to manually set the seat angle on SALSA models.

6.15 Manual adjustable backrest (manual recline Rehab Seat)

6.16 JAY backrests

Mentions fitting JAY backrests to the standard backrest assembly.

6.17 Headrest

Explains how to fit and adjust the headrest for comfort and support.

6.18 Powered Seating

Powered adjustable backrest.

Details powered adjustment for the backrest.

Powered seat Lift.

Details powered lifting function for the seat.

Powered Seat Tilt

Details powered tilting function for the seat.

6.18.2 Powered seat lift

6.18.3 Powered seat tilt

Explains the operation and safety precautions for the powered seat tilt function.

6.18.4 Quickie Direct Actuator Control Box (Fig.6.33)

7.0 Control System

7.0 R-net control system information

Introduces the R-net control system, its features, and benefits.

7.1 VR2 control system information

Provides an overview of the VR2 control system and its basic functions.

7.2 VR2-L

7.3 VR2 Dual control unit

8.0 Troubleshooting using the VR2 Hand Control

Control System Status Indicators

Explains the meaning of different battery gauge and indicator statuses for troubleshooting.

Slow or sluggish movement

Addresses issues of slow movement and potential causes like speed settings.

Speed / Profile Indicator ripples up and down

Explains that ripples indicate a locked control system.

Actuator LED flashes

Indicates inhibited actuators, suggesting consultation with a dealer.

9.0 Controller Mounts

9.1 General warnings:

General safety advice regarding controller knobs, boots, and secure mounting.

9.2 Attendant control:

Safety instructions for using the attendant control, including speed setting.

9.3 Parallel swing-away control:

Safety warnings and operational advice for parallel swing-away controller mounts.

9.4 Centre bar mount control (R-net)

9.5 Tray mount control (R-net)

Warnings and weight limits for tray mounted R-net controllers.

9.6 Swing-away tray mounted centre control (R-net)

Safety advice for swing-away tray mounted controllers, including power off.

9.7 Forus control (R-net)

Safety and operational guidelines for the Forus attendant control system.

9.8 Emergency stop button

9.9 Powered swing away arm (R-net)

Safety advice for operating the powered swing away arm with controls.

10.0 Speciality Controls

10.1 Proximity head array

Describes the proximity head array, its sensors, and potential interference issues.

10.2 Driving with the head array (Fig 10.1)

Explains how to drive the wheelchair using the head array sensors.

10.3 Proportional head control

Details the operation of the proportional head control based on headrest displacement.

10.4 Sip and puff control and buddy buttons

10.5 HMC mini joystick as a chin control or hand control

Describes the HMC mini joystick and its versatility for control.

10.6 Proportional chin control (Fig.11.8)

Explains the use of the proportional chin control with the Omni Plus module.

10.7 Micro pilot Joystick

Introduces the Micro Pilot joystick, highlighting its sensitivity and durability.

11.0 Batteries and charging

11.1 Batteries Salsa (Fig. 11.1 - 11.5)

Details the location and removal/fitting procedure for Salsa batteries.

11.2 Batteries Salsa M (Fig. 11.6 - 11.12)

11.3 Safety cut-outs

11.4 General battery information

Provides general information about mobility product batteries and their differences from car batteries.

11.5 Maintenance free batteries

Describes maintenance-free batteries and their transport safety.

11.6 Battery care

Sets out a battery care plan for optimal performance and longevity.

11.7 Maintenance free battery care plan

Provides specific steps for caring for maintenance-free batteries.

11.8 General charger information

11.9 Charger safety features

Lists safety features integrated into the charger to prevent hazards.

11.10 Connecting the charger and charging

Details the procedure for connecting the charger and the charging process.

11.11 Charger safety and caution notes

Provides essential safety and caution notes for charger usage.

11.12 The range of your vehicle

11.13 Common battery statements

Addresses common myths and legends regarding battery care.

12.0 Transportation

12.1 Transportation warnings:

Essential warnings and recommendations for transporting the wheelchair in a vehicle.

12.2 Occupant restraint instructions

12.3 Special shipping requirements:

Outlines special requirements for transporting the wheelchair by various means.

12.4 Crash testing on the SALSA, all models.

12.5 The tie down label and placement

Identifies the tie-down label and shows its placement points on the wheelchair.

12.6 Securing the wheelchair into the vehicle (Fig. 12.11 - 12.17)

13.0 Maintenance and Cleaning

13.1 Tyre maintenance and pressures

Details how to maintain tyre pressure and check for wear.

13.2 Tyre wear

Explains how to identify tyre wear and when replacement is necessary.

13.3 Drive wheel tyre repair

Provides instructions for repairing or replacing drive wheel tyres.

13.4 Removing the castor wheel

13.5 Cleaning your wheelchair

13.6 Inspection of the upholstery/seating

Advises on inspecting upholstery for tears or wear that could affect posture.

13.7 Cleaning seating

Provides instructions for washing seat covers and cleaning upholstery.

13.8 Cleaning controls

13.9 Lighting bulb exchange procedure

Explains the procedure for replacing bulbs in lights and indicators.

13.10 Electrical connections

Advises on inspecting electrical connections for faults.

13.11 How to connect the cables to the batteries

Provides safety instructions for connecting battery cables.

13.12 Controller access

13.13 Storage

Offers guidance on storing the wheelchair for extended periods.

13.14 Authorised Sunrise Medical service agents

Advises on obtaining service from authorized dealers for maintenance.

13.15 Recommended maintenance routines (Fig13.35)

13.16 Performance checks

14.0 Specification sheets (EN 12184 & ISO 7176-15)

Model: Quickie Salsa R (RWD)

Presents technical specifications for the Quickie Salsa R (RWD) model.

Model: Quickie Salsa M (MWD)

Lists technical specifications for the Quickie Salsa M (MWD) model.

Model: Quickie Salsa R (RWD) With Re-hab Seat

Provides technical specifications for the Quickie Salsa R (RWD) with Rehab Seat.

15.0 Service History

16.0 Disposal

Provides guidance on the proper disposal of the wheelchair according to local regulations.

17.0 SALSA - SALSA M Battery Wiring Diagram