N CE DE
C
ONFOR
MID
AD
QUICK GUIDE
P O R
I T A
E N G E S P
1. PREVIOUS SAFETY VERIFICATIONS
1.1. Verify the battery has an appropriate level of charge.
1.2. Verify that the brakes work properly.
1.3. Verify the correct pressure of the wheels.
1.4. Verify that all the locks from the folding mechanism are closed and blocked.
1.5. Verify that the shifter Works properly.
2. DURING THE RIDE
2.1. Switch on the control unit if the electric assistance is required.
2.2. This bicycle includes a support assistant function that will only work until the velocity of 6 km/h is approached.
Then it will stop.
2.3. La asistencia eléctrica es dependiente de la cadencia del pedaleo y cesará en el momento en que el usuario deje
de pedalear (desfase máximo < 2 s).
2.4. The electric assistance will decrease when the velocity of 20 km/h is approached and it will completely disappear
when the maximum velocity is reached (25 km/h).
2.5. The level of assistance is chosen by the user. It might be switched off and the bicycle is ridded as a conventional bicycle.
2.6. En situaciones de arrastre de la bicicleta es también recomendable apagar el sistema para evitar una activación
del motor accidental originada por la rotación de las bielas.
2.7. Although the bicycle includes a self-switch off system, it is always recommended to turn off the system when it is not being
used.
3. BATTERY CHARGE
3.1. Use only the original charger sent with the bicycle.
3.2. Connect the charger to the power point. The light of the charger will turn Green, which means that the
charger works correctly.
3.3. Connect the charger to the battery. The light of the charger will be read during the charging period.
Remember that the battery can be charged inside the bicycle, through the charging point located in the
right side of the frame, or out of the bicycle.
or
3.4. When the battery is completely charged, the light from the charger will turn Green, as in the beginning.
3.5. The electricity consumption on each charging period is
320 W·h aprox.
3.7. Do not cover the charger during the charging process.
3.8. Place the charger in a safety and stable place during the charging process.
3.9. Use the charger always in low humidity conditions.
3.10. Keep away from children.
To Next Page
Loading...
General