EasyManua.ls Logo

QUIPPLAN Q20 - Transmission

QUIPPLAN Q20
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SX0011.C 212 SX0011.C
BRAKES
I T A
E N G
E S P
P O R
TRANSMISSION
The electrical bicycles have three different Transmissions Group, depending on the model of the bicycle:
1.
Models
Transmission Group SRAM Automatix of two velocities integrated in the real wheel hub , activated by chain.
The change of gear is made automatically, without activating any control.
2.
Modelss
Transmission Group SHIMANO Nexus Inter8 of eight velocities integrated in the rear wheel hub, activated by
jagged belt CARBON DRIVE from Gates.
The gear change between the eight velocities is made through the rotatory handle control located in the right lever of the
handlebar.
3.
Models
Transmission Group SHIMANO Alfine Inter11 of eleven velocities integrated in the rear wheel hub, activated by
jagged belt CARBON DRIVE from Gates.
The gear change between the eleven velocities is made through the rotatory handle control located in the right lever od
the handlebar.
All the technical information associated to every transmission group, as well as the maintenance , adjustment and use
information is found in the Manufacturer Technical
Manuals sent with this hƐĞƌƐDanual: