SX0011.C 181 SX0011.C
CHARGER
P O R
I T A
E N G E S P
1. DESCRIPTION
LEFT: Charger 100 W (charge 2.35 A) in models . RIGHT: Charger 60 W (charge 1.35 A) in modelos "not "
CE Label
The products designed for sale in the European Union must be
marked with the symbol CE, which indicates that they fulfill the
applicative normative and the European standards.
2. SAFETY INSTRUCTIONS
For your own safety and in order to avoid possible damages, please read these instructions carefully.
The charger must only be used whith the qiE36 10.5 Ah Lithium Ion Battery approved by Quipplan and sent with the bicycle. Its use
with other type of batterys might cause damages in the charger and even material and personal injuries.
2.1. About the instalation
Do not install the product in outside or exposed to humidity places as there is risk of electrical shock.
Avoid the exposition of your body to the heat of the charger when it is connected to the power and working, as
you might get burnt.
The power point must be installed near the device and must be also easily accessible.
The charger is designed to be placed horizontal on a solid surface. During its working time, the charger
must not be covered, as there is conflagration risk.
2.2. About the power supply
To Next Page
Loading...