To Next PageTo Next Page
Need help?Do you have a question about the QUNDIS Q node 5.5 and is the answer not in the manual?
General| Model | Q node 5.5 |
|---|---|
| Category | Gateway |
| Communication Technology | Wireless M-Bus |
| Operating Frequency | 868 MHz |
| Power Supply | Battery |
| Operating Temperature | -20°C to +55°C |
| Weight | 150 g |
| Protection Class | IP54 |
| Battery Life | Up to 10 years |
Essential safety guidelines for installation, qualified staff, and ESD.
Explains CE marking, electrical hazards, ESD risks, and operating environment.
Details safety, handling, replacement, and emergency response for lithium batteries.
Covers EU declaration, standards, and operating environment parameters.
Details radio protocols, frequency bands, transmission power, and M-Bus interface specifications.
Information on power, battery life, dimensions, weight, and materials.
Lists and describes the numbered parts and operating elements.
Explains the information shown on the device's display levels.
Outlines compatibility with other QUNDIS systems like QAMR and WTT16.
Details various operational modes like Idle, Standard, Installation, and Protected modes.
Explains how system states are displayed, including remote access and bus connections.
Covers adding devices and managing IrDA connections in Master mode.
Detailed list of error codes categorized by device, metering devices, and network nodes.
Procedure for clearing error messages from the display.
Instructions for physically attaching the device to a wall.
Guidelines for electrical connections and RS232 interface setup.
Details how to connect the M-Bus and secure the device after commissioning.
Details specific mounting steps for RNN5000M 0x and RNN5000M 1x models.
