The user can set up the soft limit to define the
left and right boundaries for the pan movement.
1. SOFT LIMIT: Move the cursor here and
click IRIS + to enter. Click the up or
down button to select “ON” or “OFF” to
enable or disable this function.
2. LEFT LIMIT: Move the cursor here and
click IRIS + to enter. to control the PAN
movement of the dome to a defined
position for the left limit. Click IRIS + to
confirm.
3. RIGHT LIMIT: Move the cursor here
and click IRIS + to enter to control the
PAN movement of the dome to a defined
position for the right limit. Click IRIS + to
confirm.
4. LIMIT DELETE: Move the cursor here
and click IRIS + to delete all the settings.
To Next Page
Loading...
Need help?
General
