R82 Rabbit - READY FOR USE

6
A
G
B
GB
READY FOR USE
The Rabbit is delivered without accessories to
make it take up as little room as possible during
transportation. To assemble your Rabbit ready
for use, please follow the description below.
* Remove the Rabbit from the packaging
* Check if all tires run smoothly
* Check if the brakes work correctly. See
another page in this manual to adjust the
brakes.
The brake handles on both sides of the centre
bar has to be removed to be able to mount vari-
ous accessories. Follow the below description:
* Loosen the screw (A) using the enclosed 5
mm Allen key.
* Move the brake handles upwards and dis-
mount from the centre bar.
* Mount the desired accessories and remount
the brake handles. Fasten with the Allen
key.
The Rabbit is now ready for use and to receive
any accessories ordered.
Do not place an user in the Rabbit if it has
been standing in/exposed to sun. For the
safety and comfort of the user the Rabbit
must be moved away from the sun and
chilled before use.
Before mounting the accessories, we
advise removing the driving wheels.
Do not use without the driving wheels.