11
E
N
G
L
I
S
H
ARMREST AND TRAY
Mount the armrest fitting in the side of the seat
and adjust sideways. Fasten with the finger
screws below the seat (A).
The armrests are heightadjustable by loosen
the knob (B). Turn the knob counter clockwise to
loosen. Then pull out the knob and the armrest
is adjustable in height. Let go of the knob and
the wanted back height will be locked. Turn the
knob again - this time, clockwise, and the lock
will be further ensured.
Angle the armrest by loosen the grib (C). Fasten
at the wanted angle.
The armrest for size 3 has two vertical bars which
fits into the two holes in the seat (D). Loosen and
turn the knob to angle adjust the armrest.
The tray is mounted by leading the bar into the
pipe below the seat. Fasten at the wanted posi
-
tion with the finger screws (E).
The tray can be stabilized by mounting bars
at both sides of the tray.
GB
A
B
C
E
D
To Next Page
Loading...
