R82 wombat basic - The Sitting Comfort of the Back Cushion

16
E
N
G
L
I
S
H
THE SITTING COMFORT
OF THE BACK CUSHION
Optimum sitting comfort is very easily gained
in the Wombat chair, using the velcro sheeted
wedges.
1) Open the velcro sealings at the top and sides
of the cover (A) and turn the cover complete
or partly in side out.
2) Loosen the front sheet (B) and roll it down .
3) The lumbarsupport (C) and the wedges (D)
are adjustable and removable as required.
4) Mounting the cover:
If the cover was removed from the cushion,
it is important always to mount it in the right
order.
Put down the cushion upside down and turn
the cover inside out.
To mount the cover, start mounting the velcro
at the lowest edge (E) of the cover and the
cushion. Now place the cover on the front of
the cushion and fix it at the sides and at the
top.
GB
A
D
D
C
B
E