R82 wombat basic - Swing-Away Knee Supports

13
E
N
G
L
I
S
H
SWING-AWAY KNEE
SUPPORTS
The knee supports are mounted in the side of
the seat and fastened with two 4 mm screws
below the seat (A).
Use the 5 mm Allen key to loosen the screw (B)
and angle the knee supports.
Angle the cushion on the knee support by using
the 4 mm Allen key and loosen the screw (C).
Use the 4 mm Allen key to loosen the screw (D)
and adjusting the depth. Fasten at the wanted
position.
Push down the red button (E) to swing away the
knee support.
It is recommended to oil the swing away
parts occasionally.
GB
A
B
C
D
E