10 11
Connect
2
Connect your controller to Wi-Fi using your smartphone and
the app at the location where you will install the controller.
Connecting to Wi-Fi before installation ensures the signal is
strong enough before disconnecting any wires.
The Rachio app will guide you through connecting your
controller to Wi-Fi.
For Wi-Fi connection tips, or if you encounter issues
during the process, please reference page 31.
Install
3
Test your sprinkler system.
Check your sprinkler system by turning on each zone
with the old controller. Find and repair any issues with
your sprinkler system prior to installing your Rachio
controller.
Snap a few pictures.
Open the old controller. Use your smartphone to take a
few photos of the wiring inside the old controller from
different angles. This will come in handy when it’s time
to wire your Rachio controller.
Unplug your old controller.
Disconnect the wires from your old controller, then
remove it from the wall. You’re ready for installation.
To Next Page
Loading...
Need help?
General
