15. Weather Icons Setting (default: partly cloudy). Press
the SET key again to change the initial weather icon. Press the
CHANNEL/+ key or MAX/MIN/- key to select the initial weather
icon of Sunny, Cloudy, Partly Cloudy or Rainy. (For detailed
information of this part please refer to 10.2)
16. Sunlight Display Units (default: lux). Press the SET key
again to change the sunlight units of measure. Press the
CHANNEL/+ key or MAX/MIN/- key to toggle the sunlight units
between , W/㎡, fc or lux.
17. Location Division. (default: Northern Hemisphere).
Press the SET key again to change the location division. Press
the CHANNEL/+ key or MAX/MIN/- key to toggle the position
of the earth Northern Hemisphere (NOR) or Southern
Hemisphere (SOU). (Refer to 5.0 Final Installation of
Sensors)
7.3 Sensors Search Mode
To reacquire the lost signal, press and hold the CHANNEL/+
button for 3 seconds to enter the sensor search mode.
The icon AIO will appear in the time area.You can synchronize
one or all of individual sensors. press the CHANNEL/+ key or
MAX/MIN/- key to toggle between the following sensors:
AIO. Synchronizes Integrated outdoor transmitter
NOT. Do nothing and exit the Sensor Search Mode.
After selecting one of the above options, press the SET key to
re-sync, and the display will return to normal mode. Do not
To Next Page
Loading...
