Press the SNOOZE or MAX/MIN/- key to exit the min/max
checking and reset mode, return to normal display mode.
Note: The Maximum values will display the current values
after reset.
7.4.2 Min Record Viewing and Reset
Press the MAX/MIN/- key again (do not hold), the MIN icon will
be displayed. Press the SET key to view Min values of
pressure (ABS or REL), outdoor temperature and
humidity(Dew Point, AT and feels like), indoor temperature and
humidity, Dew Point.
Press the MAX/MIN/- key for three seconds to clear all Min
values.(pressure, temperature and humidity minimum values).
Press the SNOOZE or MAX/MIN/- key to exit the min/max
checking and reset mode, return to normal display mode.
Note: The Minimum values will display the current values
after reset.
7.5 Snooze Mode
If the alarm sounds, and you wish to silence the alarm, press
the SNOOZE key, the backlight will turn on. The alarm icon will
continue to flash and the alarm will silence for five minute.
Press any key (MIN/MAX,SET,ALARM,CHANNEL) to
permanently exit the Snooze mode.
To Next Page
Loading...
