Raddy L7 - Specification

- 49 -
indoor and outdoor temperature to a known
source.
Indoor and Outdoor
Humidity do not
agree
Allow up to one hour for the sensors to
stabilize due to signal filtering. The indoor
and outdoor humidity sensors should agree
within 10 % (the sensor accuracy is ± 5 %).
Use the calibration feature to match the
indoor and outdoor humidity to a known
source.
Display console
contrast is weak
Replace console batteries with a fresh set of
batteries.
13. Specification
13.1 Measurement Specifications
The following table provides specifications for the measured
parameters.
Measurement
Range
Accuracy
Resolution
Indoor
Temperature
0 to 60 °C
(32 to 140°F)
± 1 °C
(± 2°F)
0.1 °C(°F)
Outdoor
Temperature
-40 to 60 °C
(-40 to 140°F)
± 1 °C
(± 2°F))
0.1 °C(°F)
Indoor Humidity
10 to 99 %
± 5% (only
guaranteed
between 20 to
1 %