icon will turn off, and the current values will
be displayed.
The maximum line of sight communication
range is 1500m (4920ft) and 200m(656ft)
under most conditions. Move the sensor
assembly closer to the display console.
If the sensor assembly is too close (less
than 1.5m(5ft)), move the sensor assembly
away from the display console.
Make sure the remote sensors are not
transmitting through solid metal (acts as an
RF shield), or earth barrier (down a hill).
Move the display console around electrical
noise generating devices, such as
computers, TVs and other wireless
transmitters or receivers.
Move the remote sensor to a higher
location. Move the remote sensor to a closer
location.
Allow up to one hour for the sensors to
stabilize due to signal filtering. The indoor
and outdoor temperature sensors should
agree within 2°C (4°F)(the sensor accuracy
is ± 1°C(± 2°F)).
Use the calibration feature to match the
To Next Page
Loading...
