press any buttons until the synchronization is complete.
The remote search icon will display constantly for 3
minutes until the signal is reacquired.
The ID Number of transmitter will appear in the date area. ID
number is also labeled on the battery cover. Make sure you
are receiving the correct transmitter if you have more than one
unit working around.
ID Number. If you want to change to receive another
transmitter, press the (do not hold) ALARM button to search
the new ID number (-- display in date area) from the new
LORA outdoor transmitter (ID number is on the transmitter
body). Press the (do not hold) ALARM key again to return to
the last ID number.
7.4 Max/Min Viewing and Reset Mode
7.4.1 Max Record Viewing and Reset
In normal mode, press (do not hold) the MAX/MIN/- key, the
MAX icon will be displayed in date area.
Press the SET key to view Max values of rainfall (rate, 24h,
week or month), wind (Gust and Average), pressure (ABS or
REL), UV and Sunlight, outdoor temp and humidity (Dew Point,
AT and feels like), indoor temp and humidity, dew point.
Press the MAX/MIN/- key for three seconds to clear all Max
values.(Rainfall, wind speed, wind gust, pressure, temperature
and humidity maximum values).
To Next Page
Loading...
