When the radio is powered on, insert 3.5MM sound source device (e.g. mobile,
computer, etc.) into AUX “ ” outside the radio using 3.5MM audio cable. press “ ”
to choose the mode of “sound source input”, “LINE” appears on LCD, now this product
is used as an external source source.
(Note: we don’t provide the audio cable)
17.1. Charge: DC5V/1A-DC3A charging device is recommended to charge the radio to
avoid damage to lithium battery or radio.
If the radio is not in use for a long time, please charge it every month or take the battery
out.
If “ ” flashes on the screen after inserting USB cable, it means it’s charging. When
the radio is fully charged, “ ” appears and stops flashing. The charging time is
generally 4-5 hours.
17.2. USB external audio input: when the radio is powered on, connect it to computer
with USB cable, now audio files can be input. “ ” appears on LCD.
After choosing according to the above instructions, this product will default to the final
mode you choose.
Insert TF card and connect the radio to computer using our standard USB cable. press
“ ” , the computer will automatically install the driver software. “PC” appears on
LCD, which means successful connection.
NEXT
PREV
RF320
19
17. TYPE-C USB: charge&computer AUX-IN function
18. External sound source (AUX) input and play
19. Computer data transmission
To Next Page
Loading...
