8.3. Disconnection of Bluetooth: in the mode of Bluetooth, long press “ ” to
disconnect Bluetooth.
7.6. WB
press “ ” to switch to WB. press “ ” or press and long press “ ” or
“ ” to choose a weather frequency.
Receiving frequencies:
1－162.400MHZ, 2－162.425MHZ, 3－162.450MHZ, 4－162.475MHZ,
5－162.500MHZ, 6－162.525MHZ, 7－162.550MHZ
Turn on the alarm: long press “ ” for 2 seconds to enter automatic alarm “ALE”. In
the state of “ALE”, if no alarm signal is searched, long press “ ” again for 2 seconds
to exit “ALE”. (Note: after automatic alarm search, if no button works, long press “ ”
for 2 seconds to cancel the alarm first and then use other functions)
Turn off the alarm: after the alarm rings, press “ ” to turn off the alarm and exit “ALE”.
7.7. Start SQ function at AIR
In the mode of AIR, long press “ ”, “sq OFF” and “sq On” appear on LCD.
“sq OFF”: turn off SQ function
“sq ON”: turn on SQ function
Press “ ” to switch between the two. What you choose will be the default one.
Bluetooth name of this product: “RF320”.
8.1. When radio is powered on, press “ ” to switch to “ ”. Bluetooth symbol “ ”
flashes, which means it’s waiting for connection to Bluetooth. After successful
connection, Bluetooth symbol “ ” is always on.
8.2. Press “ ” or lightly push “ ” clockwise to play the next song. Press
“ ” or push “ ” anticlockwise to return to the previous song. Long press
“ ” for 2 seconds to switch between pause and play, or operate the mobile to
control accordingly.
RF320
13
8. Introduction to Bluetooth mode
To Next Page
Loading...
