Raddy RF886 - Frequency Range

To Next Page

To Previous Page

RF886

b. Press the button 10, then the minutes flash, then press button 6 or button 7 to adjust the minutes.

c. Press the button 10, the "bu2" or "rAd" flashes on monitor 1, then press button 6 or button 7 to select one.

d. Finally press button 10 to save the alarm clock setting.

c d e

Select " bu2": when the running time reaches the set time, the clock icon flashes and a buzz sound is emitted. 5 minutes later,

the alarm stops ringing. lf you press button 10 while the buzz sound is being made, it will enter a 9-minute snooze time, the snooze

icon will flash on the monitor 1 and the buzz sound will be made again after 9 minutes.

Cautions: When buzz sounds, pressing any button other than button 10 will turn off the current alarm clock function.

To turn on the snooze function: press button 10 when the buzz sounds.

Select "rAd": when the running time reaches the set time, the radio will automatically turn on to the working mode before shutdown,

the sleep timer icon will appear on the monitor 1, and it will automatically shutdown after reaching the shutdown time (if

shutdown in Bluetooth mode, you need to click on the Bluetooth device to play). Select "rAd" and set the auto power off time, and

start from step c:

c. Press the button 10, the "bu2" or "rAd" flashes on monitor 1, then press button 6 or button 7 to select "rAd"

d. Press button 6 or button 7 to select the shutdown time after automatic power on.

e. Finally press button 10 to save the alarm clock setting.

Selet shutdown time

Ulinmited shutdown time

Frequency Range

The RF886 can receive FM/VHF(NFM or WFM)/AM/SW/WB bands, the frequency range is shown in the table below:

FM Frequency Range

87.5-108MHz

87-108MHz

76-108MHz

64-108MHz

VHF Frequency Range

30.00-199.975MHz

AM Frequency Range

522-1710kHz/9kHz

520-1710kHz/10kHz

522-1710kHz/9kHz

SW Frequency Range

3.20-21.95MHz

WB(NOAA) Frequency Range

162.400-162.550MHz

Type

Related product manuals