58
EN
7. Safety instructions
According to DIN EN 13659, it is necessary to determine
that the movement conditions for the shutters are main-
tained in accordance with EN 12045.
◆ The displacement must amount to at least 40 mm
on the lower edge in the rolled-out position with a
force of 150 N in the upwards direction.
◆ In doing so, it must be ensured that the extending
speed of the shutters for the final 0.4 m is less than
0.15 m/s.
i
7.1 Intended use
Only use the RolloTron Basic 1100 for opening and clos-
ing roller shutters with a permissible belt.
i
Mechanical locks of any kind are not suitable
for automated operation with this device.
Only use original spare parts from RADEMACHER.
◆ By doing so, you avoid the risk of malfunctions and
damage to your RolloTron Basic 1100.
◆ As the manufacturer, we provide no guarantee for the
use of third-party components and accept no liability
for consequential damage resulting from such.
◆ All repairs to the RolloTron Basic 1100 must be un-
dertaken by authorised customer service personnel.
i
To Next Page
Loading...
