8. Safety instructions for the installation
i
Poor routing of the belt can cause the belt to fail and
leads to unnecessary loads on the RolloTron Basic
1100.
◆ Install the belt winder so that the belt runs as straight
as possible into the device, in order to avoid unnec-
essary friction and wear.
◆ Screwdriver
◆ Scissors
◆ Carpenter's gauge or measuring tape
◆ Pen
8.1 You will require the following tools
Incorrect installation can lead to property damage.
◆ Strong forces are exerted during operation of the sys-
tem which require secure installation on a firm base.
i
To Next Page
Loading...