Technical specification
Detector type
Dual conversion super-heterodyne receiver
Linear polarized self-contained antenna
Scanning frequency discriminator
Operating frequency:
Ka Wide: 33.4 GHz - 36.0 GHz
K wide: 24.100 GHz ± 150 MHz
K narrow: 24.100 GHz ± 70 MHz
X band: 10.525 GHz (± 50 MHz)
Technical parameters:
Operating temperature: --30° - +185 ° F
Power Requirement: 11V to 16V DC,
200mA Negative ground
Dimensions: 72(W) x 116(L) x 34(H)mm
2.83 x 4.57 x 1.34 inch
Weight: 8.2 oz. (200 g)
FCC Compliance
This device complies with part 15 of FCC rules: Operation is subject to the following two conditions:
(1)
This device may not cause harmful interference, and
(2)
This device must accept any interference received including interference that may cause
undesired operation.
FCC NOTE: CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE MANUFACTURER COULD VOID
THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.
Your Dealer:
Manual REV: 2016-08-17
To Next Page
Loading...
