Need help?Do you have a question about the Radenso DS1 and is the answer not in the manual?
General| Model | Radenso DS1 |
|---|---|
| Category | Radar Detector |
| GPS | Yes |
| Display | OLED |
| Power Source | 12V DC |
| Laser Detection | Yes |
| Voice Alerts | Yes |
| Auto Mute | Yes |
| Auto Sensitivity | Yes |
| Red Light Camera Alerts | Yes |
| Speed Camera Alerts | Yes |
| Bluetooth | No |
| Detection Range | Long Range |
| Radar Bands | X, K, Ka |
| Mounting | Windshield |
| False Alert Filtering | Advanced |
Details the function of Power, Volume, and Menu buttons.
Explains mute, lockout save/delete, and alert deletion using the Mute button.
Describes how to activate, deactivate, and how mute automatically ends.
Guides navigation through Main, Sub, and Option menus.
Explains how to reset most settings to default.
Settings for mode, voice, display, mute, and overspeed warning.
Enables/disables specific radar bands like Laser, Ka, MRCD, K, X, POP.
Sets sensitivity levels for Ka, K, and X radar bands.
Configures Ka/K band settings like Wide, Narrow, and Segment.
Selects specific frequency ranges for Ka band detection.
Enables or disables K and TSA filters.
Adjusts display brightness and color themes.
Configures display content during idle and sub-display modes.
Selects alert tone levels for various radar and laser bands.
Controls GPS on/off, signal announcements, and alert distances.
Configures auto lockout, lockout area, and POI/camera alerts.
Provides options to delete user points, lockouts, and auto lockouts.
Configures regional settings, time format, and daylight saving.
Sets speed units (mph/kmh) and automatic power off timers.
Configures auto mute behavior and volume adjustments.
Accesses firmware/database versions and factory reset options.
Tables for converting speed limits and muting thresholds from MPH to KM/H.
Tables for converting speed limits and muting thresholds from KM/H to MPH.
Provides speed conversion for Red Light Camera Mute between MPH and KM/H.
Describes Scan, Time, Smart Dark, and Dark display options.
Sets the data shown on the upper left display.
Explains how Laser, MRCD, and Radar alerts are displayed.
Shows lockout status and Bluetooth connection indicator.
Details K 24.199 lockout, speed, and red light camera alerts.
Describes alerts for combined camera types and overspeed warnings.
Explains alerts for exceeding POI speed limits.
Mutes alerts when vehicle speed is below a set threshold.
Mutes Red Light Camera alerts based on speed.
Explains how to save lockouts and their operational range.
Procedures for deleting single or all lockout points.
How user points are announced and saved.
Defines user point detection range and deletion methods.
How to delete specific POI points like camera locations.
Explains how the device automatically locks false alerts.
Sets the detection radius for auto lockout features.
How to delete auto lockouts and the K Lockout 24.199 function.
Configures city mode and Bluetooth app/update features.
Adjusts K band detection frequencies to narrow or wide.
Adjusts Ka band detection frequencies to narrow or wide.
Selects specific Ka band frequency ranges for detection.
How multiple threats are displayed and the function of Bogey Tone.
Explains how auto mute functions and ends.
Adjusts display brightness based on ambient light.
Automatically powers down the device after inactivity.
Describes the LED behavior for power and alerts.
Details the function of the power cord mute button.
How to update the device's firmware via PC or Bluetooth.
Outlines the conditions for FCC compliance.
Explains interference limits and remedies.
Warns against unauthorized modifications to the device.
Specifies safe operating distances related to radiation exposure.
Provides address, phone number, and email for customer support.
To Next Page
