Radenso DS1 - Advanced Band Settings and Alerts; Ka Band Segmentation Options; Threat Display and Bogey Tone; Auto Mute Mode Operation

PAGE 18
99Mhz, 34.6Ghz~34.85Ghz
2. Ka Wide: All Ka band: 33.399~35.700GHz
3. Ka Segmentation: This feature allows users to
select, from 9 filtered settings, a customized sweep
of Ka band.
a. Ka 1 : 33.399 ~ 33.705 Ghz On<->Off
b. Ka 2 : 33.705 ~ 33.903 Ghz On<->Off
c. Ka 3 : 33.903 ~ 34.191 Ghz On<->Off
d. Ka 4 : 34.191 ~ 34.587 Ghz On<->Off
e. Ka 5 : 34.587 ~ 34.803 Ghz On<->Off
f. Ka 6 : 34.803 ~ 35.163 Ghz On<->Off
g. Ka 7 : 35.163 ~ 35.379 Ghz On<->Off
h. Ka 8 : 35.379 ~ 35.613 Ghz On<->Off
i. Ka 9 : 35.613 ~ 35.701 Ghz On<->Off
Threat Display
Its shows Three radar signal (up to 3radar bands) being
detected at the same time.
*Display priority
1. Laser
2. MRCD
3. Ka
4. X, K
Bogey Tone
If the other frequency is detected during X, K, Ka Band
Alert, DS1 sounds the Bogey Tone and then the band
alert continues.
Auto Mute Mode
Auto Mute Mode : Selectable (On/Off)
1. When Radar (X, K and Ka, POP) alert starts, DS1
alerts for the time which set in Auto Mute Start