Radenso DS1 - Button Operation and Mute Functions; Button Operation Details; Mute Button Functions; Mute Mode Operation

PAGE 5
Preamble Display
During a Preamble, the display shows Radesndo DS1
logo with Bright mode.
Button Operation
Power
Press Power on/off
Vol + Press
Volume Level Up (Display & 1 Beep):
0-9 Level
Vol - Press
Volume Level Down (Display & 1
Beep)
: 9-0 Level
Menu Press Menu Mode
Mute
Press
Toggle Mute Off/On (Display Only)
Lockout save/delete
1 sec Press
Red / Speed/ Red & Speed
Camera Delete (During Alert)
2 sec Press
User Point save and delete (While
not Alerting)
Mute On/Off, Auto Demute
1. Mute On can be activated by pressing Mute button
when unit is detecting (alerting) Laser or Radar
signals. Laser/Radar/Over speed alert (Voice and
Beep) are muted.
2. Press Mute button again to turn off Mute mode.
3. Unit turns back into Mute Off from Mute On
automatically 20sec after the radar/laser alarm
ends.
4. Unit turns back into Mute Off from Mute On if the
Laser/Radar band changes.
5. Unit turns back into Mute off from Mute On if the
Menu mode is selected