PAGE 16
To Delete a User Point
During a POI Point alert, press [MUTE] for over 1 second
to delete User point.
Delete All User Points
If the user selects “Delete All User Point?” in the menu,
all User Points will be deleted.
POI Point Delete (Speed & Red light
Camera)
During a POI Point alert, press [MUTE] for over 1 second
to delete User point.
Auto Lockout
If the same signal (X Band : +-10Mhz, K Band : +-10Mhz)
is detected at the same location three times( 1st + 2nd +
3rd), DS1 will automatically lock the signal out as a false
alert. Once a signal is saved in Auto mute memory (the
1st counting) , DS1 will not save the same signal for 8
hours even though it is detected again, which means it
takes at least 16 hours( 1st + 2nd + 3rd) to automatically
lock a signal out. The interval of 8 hours is to avoid
saving too many signals in Auto mute memory.
The user can set the radius using Auto Lockout and Pin
Home.
If both Lockout and Auto Lockout are detected at the
same time, the display shows "Lockout" as a priority.
Auto Lockout Range
- Entry : approximately 450m
- Exit : approximately 500m
To Next Page
Loading...
