10
Installation of power elements.
1. Take off the cover of battery compartment ;
2. Install into the battery compartment two (or one) power
elements “size AAA”
, the polarity of contacts is indicated in the
battery compartment.
3. Install the cover of battery compartment
on the body of
device.
Notes:
1. When carrying out the long-term examination, we
recommend to install two power elements, for the short-term
one – it’s possible to use one power element.
2. Don’t mix the old and new power elements.
3.
If you do not expect the device to be used for a long
time, extract batteries from a battery compartment.
To Next Page
Loading...