RADEX RD1503 User Manual

11
Switching on and switching off of the device.
To switch on the device one should push the big button after it
the message” RD1503” appears on the display.
To switch off the device one should long push the button “OFF”
Operations in the menu
..
..
.
The menu allows the user to make necessary settings for each
case. At start and operation in the menu the observations are stopped
and restored after escaping menu.
To enter the main menu push the button “MENU” (
 page 5,
point 2). Menu and - assembly number
of the device will come up.
To motion cursor on points and select values the button
“CURSOR” (page 5, point 3) is used.
To select the point the button “SELECT” is used.
To change values the button “CHANGE” is used.
To escape points and escape menu the button “RETURN” is
used.
All individual settings made in menu, are saved after switching
off the article.
Screen RD1503 Main menu

RADEX RD1503 Specifications

General

Brand	RADEX
Model	RD1503
Category	Measuring Instruments
Language	English