20
Marking and sealing
On the front side of the monitor there are marked:
1. trade mark of the manufacturing plant;
2. trade mark – RADEX.
Conventional designation of the monitor - RD1503 appears on
display at its turning on.
The assembly number of the device is in the main menu.
The device is not sealed up by the plant - manufacturer, as the
body of the article is nonseparable and the repair is carried out only
at the plant.
Packing
The packing ensures the safety of the device during the
transportation.
The packing of device must be carried out in closed aerated
premises at the temperature of air from +15 up to +40
0
C and RH up
to 80 %, if there are no aggressive admixtures and dash in
environment.
To Next Page
Loading...
Need help?
General
