Radial Engineering Ltd. Headlight™ User Guide
11
Using the Headlight to switch
between channels
You can also use the Headlight to
toggle between two channels if you do
not have channel switching capabilities.
Older vintage amps tend to be limited in
this fashion. Simply connect the chan-
nel-1 output from the Headlight to the
channel-1 input on your amp and Head-
light output-2 to channel-2 on your amp.
You can now switch between channels
like a pro!
Acoustic to 3 channels on a mixer
Use the Headlight to switch between 3
or 4 channels on a mixer using output-1
to channel-1 for dry, output-2 to chan-
nel-2 to add reverb, output-3 and chan-
nel-3 set louder for soloing and if you
like, output-4 to insert a crazy chorus
effect on channel-4.
To Next Page
Loading...
