Radial Engineering Ltd. Headlight™ User Guide
1
tonebone HeadliGHt
Guitar amp Selector
Introduction ....................................................................................... 1
Features ........................................................................................ 2-3
Making Connections ...................................................................... 4-5
Connecting a Tuner .......................................................................... 6
All Amps On ...................................................................................... 7
Lifting the Ground ............................................................................. 8
Adjusting the Phase.......................................................................... 9
Setups ....................................................................................... 10-11
Specications ................................................................................. 12
Block Diagram ................................................................................ 13
Radial Limited Warranty ...................................................Back Cover
The Tonebone Headlight™ is a compact amp selector that lets you connect your guitar and send the
signal out to as many as four amps at once. The cool thing here is that unlike other switchers that
employ dedicated footswitches to turn on or off amps, the Headlight features a single footswitch that
sequentially rotates through the outputs depending on how many amps are connected. This allows
the Headlight to be used as a typical ABY with two outputs, as a 3-output ABC switcher for clean
rhythm and lead amps or switch between four amps to nd the ultimate tone in the studio.
The second footswitch features two modes whereby it can be used to mute all of the outputs for quiet
on-stage tuning or it can be used to turn all of the amps on at once. This opens the door to greater
creative uses on stage and in the studio alike.
To Next Page
Loading...
Need help?
General
