EasyManua.ls Logo

Radio Shack 1200093 - Listen to a Weather Channel; Function Setup

Radio Shack 1200093
12 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Use only fresh batteries of the required size and type.
Do not mix old and new batteries, different types
of batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.
If you do not plan to use the weather radio with
batteries for a week or more, remove the batteries.
Batteries can leak chemicals that can damage
electronic parts.
3 Listen to a Weather Channel
When you turn on the weather radio the first time, all
LCD segments light for a few seconds, and the automatic
channel search begins. When an active channel is found,
Ê appears. If no channels are detected, © flashes.
1. Press WEATHER/SNOOZE to listen to the weather
broadcast.
2. Press ) or ( to adjust the broadcast volume to the
desired level. VOL and the volume level (1 8) appear.
3. Press WEATHER/SNOOZE to turn off the broadcast.
4. Press ) or ( to adjust the weather alert volume to
the desired level. VOL and the volume level (18)
appear.
4 Function Setup
Function setup allows you to select a broadcast channel,
and set the alarm and clock time. You can also enable or
disable the signal loss reminder so that an alert sounds
when the radio signal is lost.

Related product manuals