14
Searching
3. Press L/O. L/O disappears.
To clear all skipped frequencies at once:
1. While searching, press PSE.
2. Hold down L/O until the scanner beeps twice.
Notes:
• If you select more than 50 frequencies to skip, each new frequency
replaces a frequency previously stored, beginning with the first stored
frequency.
• Press T or S to select a skipped frequency during pause. L/O appears
when you select a skipped frequency.
Search Speeds
The scanner has two search speeds: Normal search at 55 steps/second and
Hypersearch at 125 steps/second.
Hypersearch applies only to the 5 kHz step bands (25–27.995 MHz, 28–54
MHz, and 137–174 MHz).
To Next Page
Loading...
Need help?
General
