EasyManuals Logo

Radio Shack 200CH User Manual

Radio Shack 200CH
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
19
SPECIAL FEATURES
DELAY
Many agencies use a two-way radio sys-
tem that might have a pause of several
seconds between a query and a reply.
To avoid missing a reply, you can pro-
gram a 2-second delay into any of your
scanner’s channels or frequencies.
Then, when the scanner stops on the
channel,
DLY
appears and the scanner
continues to monitor the channel for 2
seconds after the transmission stops be-
fore it resumes scanning or searching.
You can program a 2-second delay in ei-
ther of the following ways:
If the scanner is scanning and stops
on an active channel, quickly press
DELAY
before it starts to scan again.
If the desired channel is not
selected, manually select the chan-
nel then press
DELAY.
If the scanner is searching, press
DELAY
during the search.
DLY
appears on the
display and the scanner automatically
adds a 2-second delay to every trans-
mission it stops on.
To turn off delay on any channel, select
that channel then press
DELAY
.
DLY
dis-
appears. To turn off delay for all frequen-
cies during a search, simply press
DELAY
.
SKIPPING FREQUENCIES/
CHANNELS
You can scan channels faster by skip-
ping ones that have a continuous trans-
mission, such as a weather channel.
You can lock out up to all 200 channels
while scanning, or skip up to 20 frequen-
cies during a band or direct search.
To skip a channel/frequency while scan-
ning or searching, press
S/S-LOCKOUT
when the scanner stops on it.
Notes:
If you skip more than 20 search fre-
quencies, each new frequency
replaces an earlier one, starting
from the first stored frequency.
You can manually select skipped
frequencies after you press
HOLD
to
stop a search. The scanner displays
L/O
when you select a skipped fre-
quency. See “Manually Selecting a
Channel” on Page 18).
Removing Skip from
Frequencies
To remove the skip from a frequency
while searching, press
HOLD
to stop the
search, press or to select the
skipped frequency, then repeatedly
press
S/S
until
L/O
disappears.
To remove the skip from all frequencies
at once while searching, hold down
S/S-
LOCKOUT
until the scanner beeps twice.
20-422.fm Page 19 Friday, January 7, 2000 12:54 PM

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Radio Shack 200CH and is the answer not in the manual?

Radio Shack 200CH Specifications

General IconGeneral
BrandRadio Shack
Model200CH
CategoryScanner
LanguageEnglish

Related product manuals