12
Setup
Connecting Microphones
You can connect two microphones (not supplied) to the mixer.
Connect a microphone with either an XLR plug or a ¼ in. (6.35 mm) plug to
MIC 1 on the top panel.
Connect a microphone with a ¼ in. (6.35 mm) plug to MIC 2 on the lower right
corner of the back panel.
Connecting Power
Connect the mixer’s power cord to a standard AC outlet.
w Caution: The power cord has a polarized plug that only fits one way into
a standard AC outlet. If the plug does not fit, turn it over so it fits properly. Do
not force it.
MIC 1 Jack
MIC 2 Jack
To Next Page
Loading...
