Need help? Call
1-800-989-4706
12
In this case, you must press the desired
device key before you use the remote con-
trol’s
CHANNEL + (On)
or
CHANNEL – (Off)
keys.
• If you selected
AUX1
or
AUX2
, you can
punch-through
TV
,
VCR
, or
CBL
if you have
not programmed
AUX1
or
AUX2
as a TV,
VCR, or CBL device.
USING THE 7-IN-1’S TIMER
This feature lets you set your 7-in-1 to turn off
your TV after 60 minutes.
1. Press
TIMER
on the 7-in-1.
2. Within 15 seconds, press
ENT
on the 7-in-1.
The red light blinks once.
Note:
If you do not press
ENT
within 15 sec-
onds, the red light does not blink. Start again
from Step 1.
3. Leave the 7-in-1 pointing at the TV’s infrared
sensor. Make sure there is nothing blocking
the line of sight between the 7-in-1 and the
TV.
To cancel the timer, hold down
TIMER
until the red
light blinks once, or press
TV
then press
POWER
(All Lts On)
.
PLUG
’
N POWER FUNCTIONS
The Plug ’n Power feature allows you to control
lights and appliances with an optional IR com-
mand console (RadioShack Unlimited No.
10037703) or Plug ’n Power Wireless Remote
Control System (Cat. No. 61-2676). You also
need Plug ’n Power light modules and appliance
modules (available through your local Ra-
dioShack store) to use this feature.
15-1924.fm Page 12 Monday, July 19, 1999 12:50 PM
To Next Page
Loading...
